Nexperia
20 V N-channel Trench MOSFET, 20 mΩ max at 4.5 V, SOT23
The Nexperia PMV16XN is a 20 V N-channel enhancement-mode MOSFET in a small SOT23 (TO-236AB) surface-mount package, built on Trench MOSFET technology. Its low gate threshold voltage (0.65 V typical) lets it switch from low-voltage logic: RDS(on) is specified down to VGS = 1.8 V and is 20 mΩ max at 4.5 V. Drain current is rated at 6.8 A at 25 °C ambient. Typical applications are LED drivers, power management, low-side load switches and general switching circuits in compact consumer and industrial designs.
Key Specifications
Verify against the original datasheet before quoting.
| Package | SOT23 (TO-236AB), 3-lead SMD |
|---|---|
| Drain-Source Voltage (VDS) | 20 V; VGS ±12 V |
| Drain Current (ID) | 6.8 A (VGS = 4.5 V, Tamb = 25 °C) |
| RDS(on) | 20 mΩ max at 4.5 V; 24 mΩ max at 2.5 V; 33 mΩ max at 1.8 V |
| Gate Threshold VGS(th) | 0.4 V to 0.9 V (0.65 V typ) |
| Junction Temperature (Tj) | -55 °C to 150 °C |
Market Status
Allocated – Limited Market Stock Factory lead time is currently around 53 weeks.
Quality & Traceability
Cerametronics is ISO 9001 certified and products are RoHS compliant, with counterfeit screening and full traceability on every shipment. A Certificate of Conformance is available on request. For allocation-sensitive or high-risk lots, independent third-party lab verification can be arranged — just flag it on your RFQ. Any lot that fails incoming inspection is quarantined and never shipped.
FAQ
Can the PMV16XN be driven directly from 1.8 V or 2.5 V logic?
Yes. The datasheet specifies RDS(on) at VGS = 2.5 V (24 mΩ max) and at VGS = 1.8 V (33 mΩ max), and the gate threshold is 0.4 V to 0.9 V.
Is the PMV16XN qualified for automotive use?
No AEC-Q101 qualification is stated in the datasheet; Nexperia notes that products not expressly automotive-qualified are not intended for automotive use.
← See all Hot Shortage & EOL Parts This Week
Cerametronics is an independent electronic components distributor and is not affiliated with Nexperia. All trademarks belong to their respective owners.
